Environment variables

When the agent invokes your build scripts it passes in a set of standard Buildkite environment variables, along with any that you've defined in your build configuration. You can use these environment variables in your build steps and job lifecycle hooks.

For best practices and recommendations about using secrets in your environment variables, see the Managing secrets guide.

Buildkite environment variables

The following environment variables may be visible in your commands, plugins, and hooks.

Unverified commits

Note that GitHub accepts unsigned commits, including information about the commit author and passes them along to webhooks, so you should not rely on these for authentication unless you are confident that all of your commits are trusted.

BUILDKITE # This value cannot be modified

Always true
BUILDKITE_AGENT_ACCESS_TOKEN # This value cannot be modified

The agent session token for the job. The variable is read by the agent artifact and meta-data commands.

Example: 83d544ccc223c157d2bf80d3f2a32982c32c3c0db8e3674820da5064783fb091

BUILDKITE_AGENT_DEBUG #
  • Possible values:
  • true
  • false
This value cannot be modified

The value of the debug agent configuration option.
BUILDKITE_AGENT_DISCONNECT_AFTER_JOB #
  • Possible values:
  • true
  • false
This value cannot be modified

The value of the disconnect-after-job agent configuration option.
BUILDKITE_AGENT_DISCONNECT_AFTER_IDLE_TIMEOUT # This value cannot be modified

The value of the disconnect-after-idle-timeout agent configuration option.

Example: 10

BUILDKITE_AGENT_ENDPOINT #

Default: https://agent.buildkite.com/v3

This value cannot be modified

The value of the endpoint agent configuration option. This is set as an environment variable by the bootstrap and then read by most of the buildkite-agent commands.
BUILDKITE_AGENT_EXPERIMENT # This value cannot be modified

A list of the experimental agent features that are currently enabled. The value can be set using the --experiment flag on the buildkite-agent start command or in your agent configuration file.

Example: experiment1,experiment2

BUILDKITE_AGENT_HEALTH_CHECK_ADDR # This value cannot be modified

The value of the health-check-addr agent configuration option.

Example: localhost:8080

BUILDKITE_AGENT_ID # This value cannot be modified

The UUID of the agent.

Example: 1a222222-e999-3636-8ddd-802222222222

BUILDKITE_AGENT_META_DATA_* # This value cannot be modified

The value of each agent tag. The tag name is appended to the end of the variable name. They can be set using the --tags flag on the buildkite-agent start command, or in the agent configuration file. The Queue tag is specifically used for isolating jobs and agents, and appears as the BUILDKITE_AGENT_META_DATA_QUEUE environment variable.

Example: "BUILDKITE_AGENT_META_DATA_TAGNAME=tagvalue", "BUILDKITE_AGENT_META_DATA_QUEUE=some-queue"

BUILDKITE_AGENT_NAME # This value cannot be modified

The name of the agent that ran the job.

Example: elastic-builders-088264dc4f9

BUILDKITE_AGENT_PID # This value cannot be modified

The process ID of the agent.

Example: 6

BUILDKITE_ARTIFACT_PATHS #

The artifact paths to upload after the job, if any have been specified. The value can be modified by exporting the environment variable in the environment or pre-checkout hooks.

Example: tmp/capybara/**/*;coverage/**/*

BUILDKITE_ARTIFACT_UPLOAD_DESTINATION #

The path where artifacts will be uploaded. This variable is read by the buildkite-agent artifact upload command, and during the artifact upload phase of command steps. It can only be set by exporting the environment variable in the environment, pre-checkout or pre-command hooks.

Example: s3://name-of-your-s3-bucket/$BUILDKITE_PIPELINE_ID/$BUILDKITE_BUILD_ID/$BUILDKITE_JOB_ID

BUILDKITE_BIN_PATH # This value cannot be modified

The path to the directory containing the buildkite-agent binary.

Example: /usr/local/bin

BUILDKITE_BRANCH # This value cannot be modified

The branch being built. Note that for manually triggered builds, this branch is not guaranteed to contain the commit specified by BUILDKITE_COMMIT.

Example: main

BUILDKITE_BUILD_CHECKOUT_PATH # This value cannot be modified

The path where the agent has checked out your code for this build. This variable is read by the bootstrap when the agent is started, and can only be set by exporting the environment variable in the environment or pre-checkout hooks.

Example: /var/lib/buildkite-agent/builds/agent-1/pipeline-2

BUILDKITE_BUILD_AUTHOR # This value cannot be modified

The name of the user who authored the commit being built. May be unverified. This value can be blank in some situations, including builds manually triggered using API or Buildkite web interface.

Example: Carol Danvers

BUILDKITE_BUILD_AUTHOR_EMAIL # This value cannot be modified

The notification email of the user who authored the commit being built. May be unverified. This value can be blank in some situations, including builds manually triggered using API or Buildkite web interface.

Example: cdanvers@kree-net.com

BUILDKITE_BUILD_CREATOR # This value cannot be modified

The name of the user who created the build. The value differs depending on how the build was created:

  • Buildkite dashboard: Set based on who manually created the build.
  • GitHub webhook: Set from the unverified HEAD commit.
  • Webhook: Set based on which user is attached to the API Key used.

Example: Carol Danvers

BUILDKITE_BUILD_CREATOR_EMAIL # This value cannot be modified

The notification email of the user who created the build. The value differs depending on how the build was created:

  • Buildkite dashboard: Set based on who manually created the build.
  • GitHub webhook: Set from the unverified HEAD commit.
  • Webhook: Set based on which user is attached to the API Key used.

Example: cdanvers@kree-net.com

BUILDKITE_BUILD_CREATOR_TEAMS # This value cannot be modified

A colon separated list of non-private team slugs that the build creator belongs to. The value differs depending on how the build was created:

  • Buildkite dashboard: Set based on who manually created the build.
  • GitHub webhook: Set from the unverified HEAD commit.
  • Webhook: Set based on which user is attached to the API Key used.

Example: everyone:platform

BUILDKITE_BUILD_ID # This value cannot be modified

The UUID of the build.

Example: 4735ba57-80d0-46e2-8fa0-b28223a86586

BUILDKITE_BUILD_NUMBER # This value cannot be modified

The build number. This number increases with every build, and is guaranteed to be unique within each pipeline.

Example: 1514

BUILDKITE_BUILD_PATH # This value cannot be modified

The value of the build-path agent configuration option.

Example: /var/lib/buildkite-agent/builds/

BUILDKITE_BUILD_URL # This value cannot be modified

The url for this build on Buildkite.

Example: https://buildkite.com/acme-inc/my-project/builds/1514

BUILDKITE_CANCEL_GRACE_PERIOD #

Default: 10

This value cannot be modified

The value of the cancel-grace-period agent configuration option in seconds.
BUILDKITE_CANCEL_SIGNAL #

Default: SIGTERM

The value of the cancel-signal agent configuration option. The value can be modified by exporting the environment variable in the environment or pre-checkout hooks.
BUILDKITE_CLEAN_CHECKOUT #
  • Possible values:
  • true
  • false
This value cannot be modified

Whether the build should perform a clean checkout. The variable is read during the default checkout phase of the bootstrap and can be overridden in environment or pre-checkout hooks.
BUILDKITE_CLUSTER_ID # This value cannot be modified

The UUID value of the cluster, but only if the build has an associated cluster_queue. Otherwise, this environment variable is not set.

Example: 4735ba57-80d0-46e2-8fa0-b28223a86586

BUILDKITE_COMMAND # This value cannot be modified

The command that will be run for the job.

Example: script/buildkite/specs

BUILDKITE_COMMAND_EVAL #
  • Possible values:
  • true
  • false
This value cannot be modified

The opposite of the value of the no-command-eval agent configuration option.
BUILDKITE_COMMAND_EXIT_STATUS # This value cannot be modified

The exit code from the last command run in the command hook.

Example: -1

BUILDKITE_COMMIT # This value cannot be modified

The git commit object of the build. This is usually a 40-byte hexadecimal SHA-1 hash, but can also be a symbolic name like HEAD.

Example: 83a20ec058e2fb00e7fa4558c4c6e81e2dcf253d

BUILDKITE_CONFIG_PATH #

Default: /buildkite/buildkite-agent.cfg

This value cannot be modified

The path to the agent config file.
BUILDKITE_ENV_FILE # This value cannot be modified

The path to the file containing the job's environment variables.

Example: /tmp/job-env-36711a2a-711a-484e-b180-e1b3711a80cf51b18711a

BUILDKITE_GIT_CLEAN_FLAGS #

The value of the git-clean-flags agent configuration option. The value can be modified by exporting the environment variable in the environment or pre-checkout hooks.

Example: -ffxdq

BUILDKITE_GIT_CLONE_FLAGS #

The value of the git-clone-flags agent configuration option. The value can be modified by exporting the environment variable in the environment or pre-checkout hooks.

Example: -v

BUILDKITE_GIT_SUBMODULES #
  • Possible values:
  • true
  • false
This value cannot be modified

The opposite of the value of the no-git-submodules agent configuration option.
BUILDKITE_GITHUB_DEPLOYMENT_ID # This value cannot be modified

The GitHub deployment ID. Only available on builds triggered by a GitHub Deployment.

Example: 87972451

BUILDKITE_GITHUB_DEPLOYMENT_ENVIRONMENT # This value cannot be modified

The name of the GitHub deployment environment. Only available on builds triggered by a GitHub Deployment.

Example: production

BUILDKITE_GITHUB_DEPLOYMENT_TASK # This value cannot be modified

The name of the GitHub deployment task. Only available on builds triggered by a GitHub Deployment.

Example: deploy

BUILDKITE_GITHUB_DEPLOYMENT_PAYLOAD # This value cannot be modified

The GitHub deployment payload data as serialized JSON. Only available on builds triggered by a GitHub Deployment.

Example: production

BUILDKITE_GROUP_ID # This value cannot be modified

The UUID of the group step the job belongs to. This variable is only available if the job belongs to a group step.

Example: 4a331026-8c9a-4714-aff0-8aa30211a34e

BUILDKITE_GROUP_KEY # This value cannot be modified

The value of the key attribute of the group step the job belongs to. This variable is only available if the job belongs to a group step.

Example: audit-tasks

BUILDKITE_GROUP_LABEL # This value cannot be modified

The label/name of the group step the job belongs to. This variable is only available if the job belongs to a group step.

Example: 🔒 Audit

BUILDKITE_HOOKS_PATH # This value cannot be modified

The value of the hooks-path agent configuration option.

Example: /etc/buildkite-agent/hooks/

BUILDKITE_IGNORED_ENV # This value cannot be modified

A list of environment variables that have been set in your pipeline that are protected and will be overridden, used internally to pass data from the bootstrap to the agent.

Example: BUILDKITE_GIT_CLEAN_FLAGS

BUILDKITE_JOB_ID # This value cannot be modified

The internal UUID Buildkite uses for this job.

Example: e44f9784-e20e-4b93-a21d-f41fd5869db9

BUILDKITE_JOB_LOG_TMPFILE # This value cannot be modified

The path to a temporary file containing the logs for this job. Requires enabling the enable-job-log-tmpfile agent configuration option.

Example: /tmp/buildkite_job_log1931317484

BUILDKITE_LABEL # This value cannot be modified

The label/name of the current job.

Example: 🔨 Specs

BUILDKITE_LAST_HOOK_EXIT_STATUS # This value cannot be modified

The exit code of the last hook that ran, used internally by the hooks.

Example: -1

BUILDKITE_LOCAL_HOOKS_ENABLED #
  • Possible values:
  • true
  • false
This value cannot be modified

The opposite of the value of the no-local-hooks agent configuration option.
BUILDKITE_MESSAGE # This value cannot be modified

The message associated with the build, usually the commit message or the message provided when the build is triggered. The value is empty when a message is not set. For example, when a user triggers a build from the Buildkite dashboard without entering a message, the variable returns an empty value.

Example: Added a great new feature

BUILDKITE_ORGANIZATION_ID # This value cannot be modified

The UUID of the organization.

Example: 6abcd532-f9b7-41e9-8717-40fb75a82b5d

BUILDKITE_ORGANIZATION_SLUG # This value cannot be modified

The organization name on Buildkite as used in URLs.

Example: acme-inc

BUILDKITE_PARALLEL_JOB # This value cannot be modified

The index of each parallel job created from a parallel build step, starting from 0. For a build step with parallelism: 5, the value would be 0, 1, 2, 3, and 4 respectively.

Example: 0

BUILDKITE_PARALLEL_JOB_COUNT # This value cannot be modified

The total number of parallel jobs created from a parallel build step. For a build step with parallelism: 5, the value is 5.

Example: 5

BUILDKITE_PIPELINE_DEFAULT_BRANCH # This value cannot be modified

The default branch for this pipeline.

Example: main

BUILDKITE_PIPELINE_ID # This value cannot be modified

The UUID of the pipeline.

Example: d18439cc-df59-45b0-97cc-98d7fb69d983

BUILDKITE_PIPELINE_NAME # This value cannot be modified

The displayed pipeline name on Buildkite.

Example: my_project

BUILDKITE_PIPELINE_PROVIDER # This value cannot be modified

The ID of the source code provider for the pipeline's repository.

Example: github

BUILDKITE_PIPELINE_SLUG # This value cannot be modified

The pipeline slug on Buildkite as used in URLs.

Example: my-project

BUILDKITE_PIPELINE_TEAMS # This value cannot be modified

A colon separated list of the pipeline's non-private team slugs.

Example: deploy:ops:production

BUILDKITE_PLUGIN_CONFIGURATION # This value cannot be modified

A JSON string holding the current plugin's configuration (as opposed to all the plugin configurations in the BUILDKITE_PLUGINS environment variable).

Example: {"image":"node:lts-alpine3.14"}

BUILDKITE_PLUGIN_NAME # This value cannot be modified

The current plugin's name, with all letters in uppercase and any spaces replaced with underscores.

Example: DOCKER

BUILDKITE_PLUGINS # This value cannot be modified

A JSON object containing a list plugins used in the step, and their configuration.

Example: [{"github.com/buildkite-plugins/docker-buildkite-plugin#v3.7.0":{"image":"node:lts-alpine3.14"}}]

BUILDKITE_PLUGINS_ENABLED #
  • Possible values:
  • true
  • false
This value cannot be modified

The opposite of the value of the no-plugins agent configuration option.
BUILDKITE_PLUGINS_PATH # This value cannot be modified

The value of the plugins-path agent configuration option.

Example: /etc/buildkite-agent/plugins/

BUILDKITE_PLUGIN_VALIDATION #

Default: false

This value cannot be modified

Whether to validate plugin configuration and requirements. The value can be modified by exporting the environment variable in the environment or pre-checkout hooks, or in a pipeline.yml file. It can also be enabled using the no-plugin-validation agent configuration option.
BUILDKITE_PULL_REQUEST # This value cannot be modified

The number of the pull request or false if not a pull request.

Example: 123

BUILDKITE_PULL_REQUEST_BASE_BRANCH # This value cannot be modified

The base branch that the pull request is targeting or "" if not a pull request.`

Example: main

BUILDKITE_PULL_REQUEST_DRAFT # This value cannot be modified

Set to true when the pull request is a draft. This variable is only available if a build contains a draft pull request.

Example: true

BUILDKITE_PULL_REQUEST_REPO # This value cannot be modified

The repository URL of the pull request or "" if not a pull request.

Example: git://github.com/acme-inc/my-project.git

BUILDKITE_REBUILT_FROM_BUILD_ID # This value cannot be modified

The UUID of the original build this was rebuilt from or "" if not a rebuild.

Example: 4735ba57-80d0-46e2-8fa0-b28223a86586

BUILDKITE_REBUILT_FROM_BUILD_NUMBER # This value cannot be modified

The number of the original build this was rebuilt from or "" if not a rebuild.

Example: 1514

BUILDKITE_REFSPEC #

A custom refspec for the buildkite-agent bootstrap script to use when checking out code. This variable can be modified by exporting the environment variable in the environment or pre-checkout hooks.

Example: +refs/weird/123abc:refs/local/weird/456

BUILDKITE_REPO #

The repository of your pipeline. This variable can be set by exporting the environment variable in the environment or pre-checkout hooks.

Example: git@github.com:acme-inc/my-project.git

BUILDKITE_REPO_MIRROR # This value cannot be modified

The path to the shared git mirror. Introduced in v3.47.0.

Example: /tmp/buildkite-git-mirrors

BUILDKITE_RETRY_COUNT # This value cannot be modified

How many times this job has been retried.

Example: 0

BUILDKITE_S3_ACCESS_KEY_ID # This value cannot be modified

The access key ID for your S3 IAM user, for use with private S3 buckets. The variable is read by the buildkite-agent artifact upload command, and during the artifact upload phase of command steps. The value can only be set by exporting the environment variable in the environment, pre-checkout or pre-command hooks.

Example: AKIAIOSFODNN7EXAMPLE

BUILDKITE_S3_ACCESS_URL # This value cannot be modified

The access URL for your private S3 bucket, if you are using a proxy. The variable is read by the buildkite-agent artifact upload command, as well as during the artifact upload phase of command steps. The value can only be set by exporting the environment variable in the environment, pre-checkout or pre-command hooks.

Example: https://buildkite-artifacts.example.com/

BUILDKITE_S3_ACL #

Default: public-read

  • Possible values:
  • private
  • public-read-write
  • public-read
  • authenticated-read
  • bucket-owner-read
  • bucket-owner-full-control
This value cannot be modified

The Access Control List to be set on artifacts being uploaded to your private S3 bucket. The variable is read by the buildkite-agent artifact upload command, as well as during the artifact upload phase of command steps. The value can only be set by exporting the environment variable in the environment, pre-checkout or pre-command hooks.

Must be one of the following values which map to S3 Canned ACL grants.
BUILDKITE_S3_DEFAULT_REGION #

Default: us-east-1

This value cannot be modified

The region of your private S3 bucket. The variable is read by the buildkite-agent artifact upload command, as well as during the artifact upload phase of command steps. The value can only be set by exporting the environment variable in the environment, pre-checkout or pre-command hooks.
BUILDKITE_S3_SECRET_ACCESS_KEY # This value cannot be modified

The secret access key for your S3 IAM user, for use with private S3 buckets. The variable is read by the buildkite-agent artifact upload command, as well as during the artifact upload phase of command steps. The value can only be set by exporting the environment variable in the environment, pre-checkout or pre-command hooks. Do not print or export this variable anywhere except your agent hooks.

Example: wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY

BUILDKITE_S3_SSE_ENABLED #

Default: false

This value cannot be modified

Whether to enable encryption for the artifacts in your private S3 bucket. The variable is read by the buildkite-agent artifact upload command, as well as during the artifact upload phase of command steps. The value can only be set by exporting the environment variable in the environment, pre-checkout or pre-command hooks.
BUILDKITE_SHELL # This value cannot be modified

The value of the shell agent configuration option.

Example: "/bin/bash -e -c"

BUILDKITE_SOURCE #
  • Possible values:
  • webhook
  • api
  • ui
  • trigger_job
  • schedule
  • local
This value cannot be modified

The source of the event that created the build.
BUILDKITE_SSH_KEYSCAN #
  • Possible values:
  • true
  • false
This value cannot be modified

The opposite of the value of the no-ssh-keyscan agent configuration option.
BUILDKITE_STEP_ID # This value cannot be modified

A unique string that identifies a step.

Example: 080b7d73-986d-4a39-a510-b34f9faf4710

BUILDKITE_STEP_KEY # This value cannot be modified

The value of the key command step attribute, a unique string set by you to identify a step.

Example: tests-06

BUILDKITE_TAG # This value cannot be modified

The name of the tag being built, if this build was triggered from a tag.

Example: v1.2.3

BUILDKITE_TIMEOUT # This value cannot be modified

The number of minutes until Buildkite automatically cancels this job, if a timeout has been specified, otherwise it false if no timeout is set. Jobs that time out with an exit status of 0 are marked as "passed".

Example: 15

BUILDKITE_TRACING_BACKEND #

Default:

This value cannot be modified

Set to "datadog" to send metrics to the Datadog APM using localhost:8126, or DD_AGENT_HOST:DD_AGENT_APM_PORT.

Also available as a buildkite agent configuration option.

Example: datadog

BUILDKITE_TRIGGERED_FROM_BUILD_ID # This value cannot be modified

The UUID of the build that triggered this build. This will be empty if the build was not triggered from another build.

Example: 5aa7c894-c8c0-435b-bc17-13923b90f163

BUILDKITE_TRIGGERED_FROM_BUILD_NUMBER # This value cannot be modified

The number of the build that triggered this build or "" if the build was not triggered from another build.

Example: 1264

BUILDKITE_TRIGGERED_FROM_BUILD_PIPELINE_SLUG # This value cannot be modified

The slug of the pipeline that was used to trigger this build or "" if the build was not triggered from another build.

Example: build-and-test

BUILDKITE_UNBLOCKER # This value cannot be modified

The name of the user who unblocked the build.

Example: Carol Danvers

BUILDKITE_UNBLOCKER_EMAIL # This value cannot be modified

The notification email of the user who unblocked the build.

Example: carol@nasa.gov

BUILDKITE_UNBLOCKER_ID # This value cannot be modified

The UUID of the user who unblocked the build.

Example: 4735ba57-80d0-46e2-8fa0-b28223a86586

BUILDKITE_UNBLOCKER_TEAMS # This value cannot be modified

A colon separated list of non-private team slugs that the user who unblocked the build belongs to.

Example: everyone:platform

CI # This value cannot be modified

Always true.

Deprecated environment variables

The following environment variables have been deprecated.

BUILDKITE_PROJECT_PROVIDER This has been renamed to BUILDKITE_PIPELINE_PROVIDER.
BUILDKITE_PROJECT_SLUG This has been renamed to BUILDKITE_PIPELINE_SLUG.
BUILDKITE_SCRIPT_PATH This has been renamed to BUILDKITE_COMMAND
BUILDKITE_STEP_IDENTIFIER This has been renamed to BUILDKITE_STEP_KEY
BUILDBOX_AGENT_ID This has been renamed to BUILDKITE_AGENT_ID
BUILDBOX_AGENT_NAME This has been renamed to BUILDKITE_AGENT_NAME
BUILDBOX_AGENT_META_DATA_* This has been renamed to BUILDKITE_AGENT_META_DATA_*
BUILDBOX_AGENT_ACCESS_TOKEN This has been renamed to BUILDKITE_AGENT_ACCESS_TOKEN
BUILDBOX_AGENT_API_URL This has been removed with no replacement

Defining your own

You can define environment variables in your jobs in a few ways, depending on the nature of the value being set:

  • Pipeline settings — for values that are not secret.
  • Build pipeline configuration — for values that are not secret.
  • An environment or pre-command agent hook — for values that are secret or agent-specific.

Secrets in environment variables

Do not print or export secrets in your pipelines. See the Secrets documentation for further information and best practices.

Variable interpolation

Any environment variables set by Buildkite will be interpolated by the Agent.

If you're using the YAML Steps editor to define your pipeline, only the following subset of the environment variables are available:

  • BUILDKITE_BRANCH
  • BUILDKITE_TAG
  • BUILDKITE_MESSAGE
  • BUILDKITE_COMMIT
  • BUILDKITE_PIPELINE_SLUG
  • BUILDKITE_PIPELINE_NAME
  • BUILDKITE_PIPELINE_ID
  • BUILDKITE_ORGANIZATION_SLUG
  • BUILDKITE_TRIGGERED_FROM_BUILD_PIPELINE_SLUG
  • BUILDKITE_REPO
  • BUILDKITE_PULL_REQUEST
  • BUILDKITE_PULL_REQUEST_BASE_BRANCH
  • BUILDKITE_PULL_REQUEST_REPO

Some variables, for example BUILDKITE_BUILD_NUMBER, cannot be supported in the YAML Step editor as the interpolation happens before the build is created. In those cases, interpolate them at the runtime.

Alternatively, You can also access the rest of the Buildkite environment variables by using a pipeline.yml file. Either define your entire pipeline in the YAML file, or you do a pipeline upload part way through your build that adds only the steps that use environment variables. See the dynamic pipelines docs for more information about adding steps with pipeline uploads.

Runtime variable interpolation

When using environment variables that will be evaluated at run-time, make sure you escape the $ character using $$ or \$. For example:

- command: "deploy.sh $$SERVER"
  env:
    SERVER: "server-a"

Further details about environment variable interpolation can be found in the pipeline upload CLI guide.

Environment variable precedence

You can set environment variables in lots of different places, and which ones take precedence can get a little confusing. There are many different levels at which environment variables are merged together. The following walkthrough and examples demonstrate the order in which variables are combined, as if you had set variables in every available place.

Job environment

When a job runs on an agent, the first combination of environment variables happens in the job environment itself. This is the environment you can see in a job's Environment tab in the Buildkite dashboard, and the one returned by the REST and GraphQL APIs.

If you are not using YAML Steps, the precedence of environment variables is different from the list below.

Please migrate your pipelines to use YAML steps.

The job environment is made by merging the following sets of values, where values in each successive set take precedence:

Pipeline Optional variables set by you on a pipeline on the Pipeline Settings page
Build Optional variables set by you on the build when creating a new build in the UI or using the REST API
Step Optional variables set by you on a step in the YAML steps editor or a pipeline.yml file
Standard The set of variables provided by Buildkite to every job

For example, if you had configured the following environment variables:

Pipeline MY_ENV1="a"
Build MY_ENV1="b"
Step MY_ENV1="c"

In the final job environment, the value of MY_ENV1 would be "c".

Setting variables in a pipeline.yml

There are two places in a pipeline.yml file that you can set environment variables:

  1. In the env attribute of command and trigger steps.
  2. In the env attribute at the top of the yaml file, before you define your pipeline's steps.

Defining an environment variable at the top of your yaml file will set that variable on each of the command steps in the pipeline, and is equivalent to setting the env attribute on every step. This includes further pipeline uploads through buildkite-agent pipeline upload.

Setting variables in a Trigger step

Environment variables are not automatically passed through to builds created with trigger steps. To set build-level environment variables on triggered builds, set the trigger step's env attribute.

Agent environment

Separate to the job's base environment, your buildkite-agent process has an environment of its own. This is made up of:

  • operating system environment variables
  • any variables you set on your agent when you started it
  • any environment variables that were inherited from how you started the process (for example, systemd sets some env vars for you)

For a list of variables and configuration flags, you can set on your agent, see the Buildkite agent's start command documentation.

Job runtime environment

Once the job is accepted by an agent, more environment merging happens. Starting with the environment that we put together in the Job Environment section, we merge in some of the variables from the agent environment.

Not all variables from the agent are available in the job runtime. For example, we remove the agent's registration token and replace it with a build session token that has limited permissions. This new session token is used when you run the artifact, meta-data and pipeline commands inside the job.

After the agent variables have been merged, the bootstrap script is run.

The bootstrap runs any hooks that have been defined by your agent, your repository or plugins. Variables that are set in these hooks will be merged into the runtime environment, and will override any previous values that are set.

Take care with environment variables in hooks

Variables that are defined in hooks can override anything that exists in the environment.

This is the environment your command runs in 🎉

Finally, if your job's commands make any changes to the environment, those changes will only survive as long as the script is running.